Introduction
No | Name | Brief description | |
1 | Cover dome | Covers the inner cover, lens, and main body to protect them. | |
|
|
| |
2 | Inner cover | Covers the main body to protect it. | |
3 | Wing locker | Push a long thin screwdriver into its narrow spot and press it outward when you want to | |
remove the inner cover. | |||
|
| ||
4 | Main body | Includes a lens, a switch board, a PCB board, screws, and such. | |
5 | Mount bracket | Used as a ceiling or wall fixture. It is fixed using three long tab screws provided in the | |
package. | |||
|
| ||
6 | Wiring Passage | This passage is designed to make arrangement of the cables if you drill a hole to extend the wiring. | |
|
|
| |
7 | Zoom lever | Using this lever, the lens zoom can be adjusted and fixed. | |
|
|
| |
8 | Focus lever | The lens focus can be adjusted by rotating it left or right. Rotate it clockwise for fixing. | |
|
|
| |
9 | Tilt fixing screw | Using this screw, the slope of the lens can be adjusted and fixed. | |
|
|
| |
10 | This switch is used to set and adjust the settings of the camera’s functions. | ||
|
|
| |
11 | Groove mark | To attach the Main body to the Mount bracket, align this groove mark on the Main body with | |
the wide groove in the CAMERA FRONT side on the Mount bracket. | |||
|
| ||
12 | Locker | Used to open or close the Cover dome. To open the cover dome, press the locker. | |
|
|
| |
|
| Push it outward and rotate the main body in UNLOCK direction when you want to remove | |
13 | Lock releaser | the Mount bracket from the Main body or to remove the installed camera from the Mount | |
|
| bracket. | |
14 | Cable | Connect the Video connector to BNC cable and Power connector to power adapter. | |
|
|
|