How to use OSD Menu
| ALC |
|
|
| |
LEVEL | ||
BACKLIGHT |
| OFF |
The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and
②If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area.
you can set the desired BLC zone by defining the size and location.
displayed dark on the monitor affected by the backlight. To solve this problem, you can use the BLC(Back Light Compensation) function to improve the sharpness of the image in such a high contrast scene.
❖AGC
[OFF, VERY LOW, LOW, MID, HIGH, VERY HIGH, USER, FIX]
The AGC (Auto Gain Control) menu is used to set the AGC level of the camera. When the AGC is active, the camera automatically increases the sensitivity by amplifying the Video signal when the strength of the signal falls below the normal value.
If OFF or FIX mode is selected in the
If you press the SETUP switch with a USER sub menu selected, you will see the appropriate screen.
ENG
| ALC |
|
|
| AGC USER |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
LEVEL |
|
|
|
| |||
BACKLIGHT |
| BLC |
| LEVEL | [16] |
|
|
|
|
|
| ||||
AREA |
| USER |
|
|
|
| |
<SIZE> |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
<LOCATION> |
|
|
|
|
|
| |
|
|
|
| ||||
|
|
|
| ||||
If you use an ordinary camera in a scene | In USER mode, you can break down the level in | |
16 steps from VERY LOW to VERY HIGH to your | ||
with an intensive backlight, the object will be | ||
preference. | ||
|
English – 19