5.If the camera operates normally, the following screen will be displayed for 5 seconds and then disappears.
SAMSUNG | PROTOCOL |
ADDRESS | 0 |
TYPE | |
BAUD RATE | 9600 |
ROM VER | 1.000 |
EEP VER | 1.000 |
LENS | OK. |
|
|
*ROM VER and EEP VER may change without notice.
6.The requirements for RS485 control is as follows :
-Signaling Speed: 9600 bps
-Data Bit : 8 bits
-Stop Bit : 1 bit
-Parity Bit : none
ENG
15