To select [RET], press UP key on the top block or press DOWN key on the bottom block and then press ENTER key to return a upper menu.
In order to set the motion detection area on your own, you have to specify the size and location for the area setting. When [ON] is selected in [DISPLAY], the detected motion is displayed on the screen and the camera sends the Alarm Out signal. You can also
assign the sensitivity for motion detection.
Note
※MOTION DET menu is not available for the first 5 seconds after operating the PAN/TILT/ZOOM/FOCUS/IRIS functions.
※Since the motion detecting function depends on the brightness of selected area, it may dysfunction due to the different brightness between the background and object.
❚DAY/NIGHT
The [DAY/NIGHT] menu is used to configure the day and night related settings for this camera. This camera can turn the IR (Infrared) filter on or off.
| CAMERA ID | OFF |
| IRIS | ALC... |
| SHUTTER | OFF |
| AGC | HIGH |
| WHITE BAL | ATW2 |
| FOCUS MODE | AF |
| MOTION DET | OFF |
| DAY/NIGHT | DAY... |
| PRIVACY | OFF |
| SPECIAL | ... |
| PRESET | ... |
26 | EXIT | QUIT |
