Window0 |
Window1
Note
The selected window for AREA is displayed in white and the unselected one is displayed in black.
2. Label Type
The
area is displayed with size and position changing. You cannot
change [AREA] because it is displayed with
| Label2 |
Label1 |
|
Label3 | Label0 |
|
3.Block Type
The screen displays with small blocks. When a motion is detected in the selected blocks, the small blocks are displayed on the screen. n [PRESET]: The whole screen becomes the motion detection area. n [USER...]: You can manually set the motion detection area. Use the
Up/Down/Left/Right SETUP switch to set the area. To erase the selected block, press the SETUP switch.
25
ENG
