4.Determine the type of power supply and set the POWER SELECTION switch accordingly. Next, plug the power adapter into a wall outlet.
5.If the camera operates normally, the following screen will be displayed for 5 seconds and then disappears.
|
| SYSTEM INFO |
|
| |
TYPE | 4_34 ZOM_WDR_P | ||||
PROTOCOL |
|
| SAMSUNG | ||
ADDRESS | 0 | ||||
COMM.TYPE |
| RS485,HALF | |||
BAUD RATE | 9600 | ||||
CAMERA VER. | V1.00_090817 | ||||
LENS |
|
| OK | ||
English
6.The requirements for RS485 control is as follows :
-Signaling Speed: 9600 bps
-Data Bit : 8 bits
-Stop Bit : 1 bit
-Parity Bit : none