Samsung SCC-C4237P, SCC-C4239P English _19, AGC, DNR, MOTION, English, Reduces the noise on the camera image, Set it to <USER> to specify the level

DNR SHUTTER SENS-UP FLICKERLESS XDR

(VERY HIGH) ---

MID

OFF

OFF

OFF

MID

VPS

IRIS

AGC

OFF

OFF

ALC

CAMERA ID

CAMERA SET

￿

￿

AGC

With this, you can adjust the AGC level of a camera.

With AGC active, if the signal strength falls

below the standard level, AGC will amplify the video signal to automatically improve the sensitivity.

If <SENS-UP> is set to <OFF> or <FIX> mode, the <MOTION> menu will switch to <AGC>.

With the USER ( ) submenu selected, press [ENTER] to display the corresponding screen.

In this mode, you can select from VERY LOW

to VERY HIGH in 16 levels, enabling deeper, wider choices to your convenience. With the FIX ( ) submenu selected, press [ENTER] to display the corresponding screen. In this mode, you can select an individualized mode in 16 levels, regardless of the brightness.

M As long as the DAY/NIGHT menu is set to AUTO in Camera Setup, the AGC menu is not available.

As long as FLICKERLESS is set to ON, the AGC mode is not available.

If you set BACKLIGHT to WDR, the AGC fix mode is not available.

MOTION

You can specify a level of AGC for controlling the camera motion. This is available only of the SENSE UP menu is set to AUTO.

Select F.FAST if you want to monitor a very fast moving object in a low contrast scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same condition.

As long as DAY/NIGHT is set to <AUTO>, the <MOTION> menu is not available.

DNR

Reduces the noise on the camera image.

The higher the level is, the greater the effect is.

Set it to <USER> to specify the level.

English

English _19