Samsung SCC-C4203AP, SCC-C4303AP BeforeInstallation, Checking the Package Contents, Power LED, RS485 terminal, POWER IN terminal, ALARM OUT terminal, VIDEO OUT terminal, the package

☞In Setup Menu Mode- UP/ DOWN buttons: Use to move the cursor up or down.

- LEFT/ RIGHT buttons: Use to move the cursor left or right, or to sequentially view the values that can be assigned to a parameter.

- ENTER button: Use to select a Sub Menu item, and to accept the current value.

ZOOM/ FOCUS REMOTE terminals

Use to control ZOOM/ FOCUS from an external controller. Depending on the input conditions, the terminals can be set to 4 different modes.

(Operating Voltage Range : +3V ~+13V, -3V~-13V)

Code	Item	Tele	Wide	Far	Near
	A	-6V	+6V	+6V	-6V
	B	-6V	+6V	-6V	+6V
	C	+6V	-6V	+6V	-6V
	D	+6V	-6V	-6V	+6V

Caution : In the event of a simultaneous input of RS485 and wired remote control signal, whichever was input first will be activated.

(For a camera with the ROM version 1.2 or above, please refer to page 33.)

ALARM OUT terminal

An alarm signal is output from this terminal when the MOTION DET mode is activated or BW mode is activated. (Open Collector: DC24V 40mA Max)

VIDEO OUT terminal

Connect the monitor's VIDEO IN. The video signal from the camera is transmitted to the monitor via this terminal.

RS485 terminal

RS485 remote control terminal.

Power LED

Lights when power is on.

POWER IN terminal

Plug in the power adapter here.

7

3 Installation

BeforeInstallation

Checking the Package Contents

Make sure that the following accessories are included in	E
the package.

220xPower			Zoom
LOW
DIGITAL		LIGHT
	COLOR		CAMERA

SCC-C4201(P),C4203(P),	User's Guide
C4301(P),C4303(P)

Mount Adapter

Screw (2)

Terminal Block

8