Samsung SCC-C4203AP, SCC-C4303AP manual Navigating the Setup Menu, Structure of the Setup Menu

4.Determine the type of power supply and set the POWER SELECTION switch accordingly. Next, plug the power adapter into a wall outlet.

The requirements for the power adapter for each model are as follows:

●SCC-C4201(P), SCC-C4203(P) : DC12V 600mA

●SCC-C4301(P), SCC-C4303(P) : AC24V 300mA DC12V 600mA

5.If the camera operates normally, the following screen will be displayed for 5 seconds and then disappears.

SAMSUNG PROTOCOL

ADDR : 0

TYPE : RS-485, HALF

BAUD : 9600

LENS CHECK : OK!

6.The requirements for RS485 control is as follows :

●Signaling Speed: 9600 bps

●Data Bit : 8 bits

●Stop Bit : 1 bit

●Parity Bit : none

4 Navigating the Setup Menu

In this chapter, we will take a look at the menu system of the SCC-C4201(P), C4203(P), C4301(P), and C4303(P). First, we will take a look at the structure of the Setup Menu and then describe the functions of each menu item in the menu.

Structure of the Setup Menu

E

●Structure of the Setup Menu of the SCC-C4201(P)

CAMERA ID	OFF/ON...
	ALC.../MANU...
IRIS
	OFF/1/100(1/120) ~ 1/10K￿
SHUTTER
	/AUTO X2~X128/FIX X2~X128
AGC	OFF/LOW/HIGH
MOTION	S.S/SLOW/NORMAL/FAST/F.F
	ATW/AWC/MANU...
WHITE BAL
SPECIAL	...	LANGUAGE	ENGLISH
		CTRL TYPE	A/B/C/D
		RS-485	...
		PIP	OFF/ON...
		MIRROR	OFF/ON
		D-ZOOM	OFF/X2 ~ X10
		POSI/NEGA	+/-
		ZOOM SPEED	1/2/3/4
		DETAIL(0)	---- I----
		RET
AUTO FOCUS	AF/MF/ONEAF
MOTION DET	OFF/ON...
	...
PRESET
	QUIT/SAVE/PRESET
EXIT

11 12