2Event Search
●Searches Normal Recording, Schedule Recording, Alarm Recording, Motion Recording, and V.Loss(Video Loss) Recording by the time.
●You shall select a channel to search to see the event information of the channel.
●On the basis of event information for each channel, the system searches a video file for the event. Only one channel is allowed for video search.
●If you use both the [Enter] button and the , button key to select a channel, the system will show the list of event for the selected channel only.
●After channel selection, you can use the , [Enter] button to select an event out of the list. The checkbox on the left of the selected event number will be checked.
●If you want to start the search, use the button until you reach [START] and press the [Enter] button. If you want to cancel the search, move to the [Exit] and press the [Enter] button. If you wish to view the event list of the next screen, select [NEXT] and press the [Enter] button and if you wish to view the event list of the previous screen, select [PREV] and press the [Enter] button.
●When you want to see the initial screen's event list, select the [initial] button, and when you want to see the end screen's event list, select the [end] button.
●In the case of the 2080/2082,
●If you press the search button while viewing the event recording list, the event search list comes up again.
This makes searching for the next event easier and faster.