SHR-2160/2162/2080/2082 USER’S MANUAL

6Record Schedule

This setup selects a time to record automatically.Selection by the day or by the time is available.The default value is set to “Event Record”.●Press “CH >” copies the value of Channel 1 to all the channels.●The horizontal axis numbered from 0 to 23 represents the time value.

The vertical axis numbered from S to H represents the day value. (H : Holiday) Selection by the day or by the time is available.

●Pressing “ALL” converts the overall setting of the selection window into Continuous ➝ Event Record ➝ Schedule/Event Record.

●Record ScheduleRecording starts automatically on the preset time.Recording follows the condition that set in 5-18.Record Mode.☛Refer to 7-2 Record Schedule.●Event Recording

Recording starts automatically when an event (Alarm/Motion Detection/Video Loss) occurs within a setup time.

Recording follows the condition that set in 5-20.Event Record Mode setup.☛Refer to 7-3 Event Recording.

●Scheduled recording is indicted by yellow, event recording by blue, scheduled/event recording by red, and non-designated recording by gray.

5-25English