Callback Settings
●The Callback function is used to forward a callback message to the IP where SmartViewer is in action in case Alarm, Motion Detection, or Video Loss event occurs.
●On/Off : Off is default but you may choose On.●IP Address : IP setting is available only when On is selected from On/off Setting. Select the IP address of PC where SmartViewer is in action.
●Port(UDP) : You may choose one from 7900 to 7999 and the number changes by 1. Selects the Port value for the Callback Connection menu from SmartViewer Setup.
●Retrial : You may choose one from 1 to 20 and the number changes by 1.
Caution
-Though Callback is set to ON, any Callback message will be created unless Alarm, Motion Detection, and Video Loss are set by EventRecord.
-Unless the Callback button is clicked, SmartViewer does not receive any Callback message.