Samsung SM-R382 manual 16

Getting started

4 Slide the latch on the strap inwards. Then, insert the pin into the recess at the other side of the Gear.

2

1

If you are fitting a strap that is not manufactured by Samsung, refer to the image below. Insert one end of the pin into a recess and press the other end of the pin inwards. Press the pin inwards using your finger or a tool, such as a small flat-tip screwdriver. Then, while pressing the pin inwards move the strap into position between the device’s recesses. Release you finger or remove the tool when the pin is held in place between the device and the strap. Adjust the strap until the pin is sitting inside each recess.

1

2

16