INSERTING AND REMOVING A MEMORY CARD (NOT SUPPLIED)
To insert a memory card
1.Turn the camcorder off.2.Open the memory card/jack cover as shown in the diagram.
3.Insert a memory card into the memory card slot until it softly clicks in the direction of the arrow shown in the diagram.
4.Close the cover.To eject a memory card
1.Turn the camcorder off.
2.Open the memory card/jack cover as shown in the diagram.
3.Slightly push the memory card inwards to pop it out.
4.Pull the memory card out of the memory card slot and close the cover.
•If a memory card is not inserted correctly, the camcorder may fail to operate normally or the memory card slot may be damaged.
•Be careful when ejecting a memory card. If the memory card is pushed hard, it may pop out suddenly.
Your camcorder supports only SD(Secure Digital) and SDHC(Secure Digital High Capacity) cards. Compatibility with this camcorder may vary depending on the card manufacturer and type.
31