Samsung SNC-B2335P To configure the IP settings, English _51, 1.Select <Basic> - <IP, The IP setup window appears, ￿GOP* size : Select a GOP size between 5 and

￿Target bitrate : Transfers video signal at a specifi ed bit rate.

￿Compression : Adjust the compression rate from 5 through 100 by 5.

￿Encode priority : Set the video transfer method to Frame rate or Quality.

￿GOP* size : Select a GOP size between 5 and 15.

￿Deblock : This will soften the edges between macro blocks.

￿De-Interlace : You can reduce the grid noise by using the de-interlacing function. Only available if MPEG4 resolution is set to 4CIF.

J If the WDR is set to <OFF> or the MPEG4 resolution is not 4CIF, you cannot enable the MPEG4 CODEC’s de-interlacing

￿Profile : Select Baseline or Main for the H.264 profiling method.

￿Entropy coding* : Reduces the compression loss due to encoding.

J If you set the profile to Baseline, the entropy coding is available only for CAVLC*; if you set it to MAIN, the entropy coding is available for both CAVLC* and CABAC*.

￿Motion estimation : Estimates the movement of pixels by determining the motion vector.

￿Input gain : You can set the audio input gain from 0 to 10.

￿Output gain : You can set the audio output gain from 0 to 10.

J If the audio input gain is set to 0, no sound is heard.

2.When done, click [Apply]. Your settings will be saved.

To configure the IP settings

1.Select <Basic> - <IP>.

The IP setup window appears.

￿IP confi guration : Set the IP and port settings for the camera.

-IP type : Select one from <Static IP>, <Dynamic IP>, and <PPPoE IP>.

If you select <PPPoE IP>, you can provide the optional ADSL IP and password. However, the multicast items (multicast address, port, TTL) for VNP and RTP will disappear.

SCREEN SETUP ●

English _51