Samsung SP-H03/KR, SP0351VBX/EN To disconnect the projector from a PC

To disconnect the projector from a PC.

Make sure to end the connection properly to prevent damage to the projector or your data.

1.Click on the Windows Taskbar.

2.Click the pop-up message.

3.Disconnect the USB cable only when the message says that it is safe to remove the hardware.

• Do not disconnect the USB cable while the files are being copied, as this could result in loss of data or damage to the projector.

•The connection will not end if you have projector files open on the PC. Close all projector files and try again.

•Other versions of Windows operate similarly. Follow the correct procedure for removing a USB device from your PC safely for your version of Windows.

2-12	Installation and Connection