30
30
30
LUMEN
30
LUMEN
Do not expose the adaptor to water. Do not let the adaptor to get wet.
•Water can cause a malfunction, electric shock or fire. Do not use adaptor by the waterside or outside particularly when it rains or snows. Do not let the adaptor to get wet when you clean the floor with water.
Keep power adaptor away from any other heat source.
•Otherwise, it may result in fire.
Do not open any cover on the product.
•This would prove hazardous because of
Be particularly careful not to let any of your body parts contact the exhaust vents when the projector is operating.
Do not place objects vulnerable to heat near the projector.
30
30
30
LUMEN
30
LUMEN
30
LUMEN
Do not place the adapter on top of another adapter.
•It may result in fire.
Remove the vinyl cover of the adapter before using the adaptor.
•Otherwise, it may result in fire.
Avoid going near the exhaust vents or lens. Both emit extreme heat when the projector is operating and immediately after the projector is turned off.
Note that the exhaust vents stay hot even after the projector is powered off.
The lens may be hot. Be careful not to contact it. (Children and people with sensitive skin should be most cautious.)
Warning
Do not clean the product case or body using 
30 
water spray or a wet cloth. Avoid using any
chemicals such as detergents, industrial or automotive polish, abrasive, wax, benzene, alcohol on any plastic part of the product such as projector case, since this may cause damage.
Using surfactant which contains a large amount of alcohol, solvent, or other strong chemicals may result in discoloration, cracking, or damage to the product exterior. Be sure to use the recommended cleansing agent only.
You can purchase the recommended cleansing agent from a service center.
| Caution |
|
|
| When cleaning the product, disconnect the |
|
| power cord and clean the product with a soft |
| 30 | dry cloth. |
! |
| • Avoid using chemicals such as wax, |
|
| benzene, alcohol, thinner, mosquito- |
|
| repellent, fragrance, lubrication or |
|
| cleansing agent when cleaning the |
|
| product. |
•This may result in the exterior being deformed or the print being removed.
30
LUMEN
!
SAMSUNG
!
To clean dirt or stains on the front projection lens, dampen a clean cloth with a small amount of lens cleaner or a neutral detergent and water, and then rub gently.
Ask a Service Center to clean the interior of the projector at least once per year.
Major Safety Precautions |