Lamp Replacement
Cautions on Lamp Replacement
■Projector lamp requires replacement after.■Use the recommended lamp when replacing. Lamp specifications are defined in the user’s manual. Replace with the same model provided with the projector.
-Lamp Model Name :- Lamp Type | : 250W UHP |
■Wait for at least 30 minutes before replacing lamps to cool off the lamp unit after disconnecting power.
■Lamp is a
■Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device.
■Be careful not to touch the lamp itself when handling the lamp unit.■If the lamp is poorly handled, it may result in poor picture quality or shorter life time of lamp.
■The projector is will not operate normally if the cover is not locked completely after lamp replacement. Refer to LED information in the user’s manual if the projector does not operate normally.
Information Other
Lamp Replacement Procedure
1 Detach the screw of the | 2 Push to open the lamp |
lamp cover. | cover in the direction of |
| the arrow. |
4 Lift and grip the lamp | 5 Reverse the disassembly |
handle in the direction of | procedure to assemble the |
■ The Lamp is high-
Replacement Lamp
the arrow and pull it out. | unit after replacement. |
NOTE
temperature high- pressure product. Wait for at least 30 minutes to proceed after disconnecting power.
■Be sure that the power cord is disconnected before proceeding.
77