device management
8.Click [Capture] button. When the button is pressed, the red indicator of the fingerprint scanner turns on. Place the finger on the scanner to register the first fingerprint template. Once the red indicator turns off, release your finger and then put the same finger onto the fingerprint scanner again when the light turns on. As shown in the figure, the registered fingerprint is scanned properly if the fingerprint is clear and marked with stars more than 3.
J Once completed with the first fingerprint scanning, release your finger from the scanner and wait until the red indicator turns on before the second fingerprint scanning. If the scanned fingerprint is marked with 1 or 2 stars, try again or use another finger.
9.Click [Apply].
10.Check [Use Biometric Information] to apply the scanned fingerprint in [Fingerprint Management]. You don’t need to check it if no fingerprint is used for the Master Card.
11.Click Save <
12.Move to the [Device List] tab.