Samsung SSA-M1000 SSA-M1000/EXP access control, 154_ access control

access control

26.With the card readers (SSA-S30XX series and SSA-R20xx series), you can transfer or receive fingerprint data. For the SSA-X500 fingerprint scanner, you can connect it to the USB port of the PC to register fingerprints which will be evaluated in 5-star grading according to the image state and quality.

27.You can also receive fingerprint data from a specific fingerprint reader and transfer them to other device.

28.Select a device that contains fingerprint data in [Select Fingerprint Reader].

J Check if the selected device contains fingerprint data with the corresponding card numbers before you can receive the data from it. You should also check if the card number matches with the fingerprint data to receive. If the registered card number is 25500001, and you try to receive the fingerprint corresponding to card number 00100001, you couldn’t obtain the fingerprint data.

29.Click [Fingerprint Receive]. The fingerprint data received is displayed in [Biometrics Data (128 Bit Encrypted)].

30.If you use the fingerprint scanner, SSA-X500, you can register and transfer fingerprints relatively with ease.

J For fingerprint registration, SSA-X500 fingerprint scanner must be installed. If installed with the fingerprint scanner, connect the scanner to a USB port of the computer and install the SSA-X500 device driver. For device driver installation, refer to the program installation section of this manual.

154_ access control