Samsung UA40D6600WM Before using 3D function, NN Recommended 3D operating distance

UA32D6000SNXTW, UA32D6000SNXXV, UA32D6000SNXZN, UA40D6000SMSHD, UA40D6000SMXHC, UA40D6000SMXSQ, UA40D6000SNXHC, UA40D6000SNXTW, UA40D6000SNXUM, UA40D6000SNXXV, UA40D6000SNXZN, UA40D6400UMSHD, UA40D6400UMXHC, UA40D6400UMXSQ, UA40D6400UNXHC, UA40D6400UNXUM, UA40D6400UNXXV, UA40D6400UNXZN, UA40D6600WMSHD, UA40D6600WMXHC, UA40D6600WMXXV, UA40D6600WNXHC, UA40D6600WNXUM, UA40D6600WNXXV, UA40D6600WNXZN, UA46D6000SMSHD, UA46D6000SMXHC, UA46D6000SMXSQ, UA46D6000SNXHC, UA46D6000SNXMN, UA46D6000SNXRQ, UA46D6000SNXSQ, UA46D6000SNXUM, UA46D6000SNXXV, UA46D6000SNXZN, UA46D6400UMSHD, UA46D6400UMXHC, UA46D6400UMXSQ, UA46D6400UMXXS, UA46D6400UNXHC, UA46D6400UNXRQ, UA46D6400UNXSQ, UA46D6400UNXUM, UA46D6400UNXZN, UA46D6600WMSHD, UA46D6600WMXHC, UA46D6600WMXSQ, UA46D6600WMXXV, UA46D6600WNXHC, UA46D6600WNXRQ, UA46D6600WNXXV, UA46D6600WNXZN, UA55D6400UMXSQ, UA55D6400UNXSQ, UA55D6400UNXZN, UA55D6600WMXHC, UA55D6600WMXXV, UA55D6600WNXXV, UA55D6600WNXZN, UA60D6600VMXSQ, UA60D6600VNXUM

Before using 3D function...NN Recommended 3D operating distance

Recommended
pairing distance	50cm

	Recommended	2~6m (6 to 19.5 ft)
	viewing distance	2~6m (6 to 19.5 ft)
	viewing distance
◀
	Recommended	50cm (1.6 ft)
	pairing distance	50cm (1.6 ft)
	pairing distance

Recommended	▶
viewing distance

English

Models

3❑❑ Using the INFO button (Now & Next guide)
4❑❑ Using the Channel Menu
7: Select
to set at your convenience. If you select
, you can set the day you want
Date
12❑❑ Using the Channel
14Lock
Unlock
●● This function is available only when the Channel Lock is set to On
NN This function may not be supported depending on the region
Edit Channel Number: Edit the number by pressing the number buttons
desired
15Delete: Delete a channel to display the channels you want
NN A gray-colouredchannel indicates the channel has been deleted
Channel Status Display Icons
16❑❑ Using Favourite Channels
19❑❑ Memorising Channels
21■■ Manual Tuning
Scans for a channel manually and stores in the TV
Press the l/ rbutton to select New
Set the Channel, Frequency and Bandwidth
NN The Bandwidth function is supported in New zealand and Singapore
only
Press the dbutton to select Search. When scanning has finished a
channel is updated in the channel list
23NN Channel mode
●● C (aerial channel mode) / S (cable channel mode): These two modes allow
24❑❑ Other Features
25■■ Fine Tune
(analogue channels only)
automatically during the search and store operation. If the signal is weak or
clear
NN Settings are applied to the channel you’re currently watching
the right-handside of the channel number in the channel banner
NN To reset the fine-tuning,select Reset
26❑❑ Changing the Preset Picture Mode
27❑❑ Adjusting Picture Settings
28❑❑ Changing the Picture Size
29–– 4:3: The default setting for a movie or normal broadcasting
NN Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and centre of the screen may cause image
retention(screen burn) which are not covered by the warranty
1080i / 1080p) or Component (1080i / 1080p) signals are inputted
–– Smart View 1: Reduces the 16:9 picture by 50%
–– Smart View 2: Reduces the 16:9 picture by 25%
Smart View 1 is enabled only in HDMI mode
NN Smart View 2 is enabled only in HDMI or DTV mode
31NN Not available in PC, Component or HDMI mode
32❑❑ Changing the Picture Options
33screen depth
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast
Shadow Detail (-2~+2):Increase the brightness of dark images
Gamma: Adjust the primary colour intensity
Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern
menu disappears or a menu other than the Picture menu is opened, the
calibration is saved and the Expert Pattern window disappears
NN While the Expert Pattern is running, sound is not outputted
NN Only enabled on DTV, Component / HDMI mode
37■■ Picture Options
OO MENUm→ Picture → Picture Options → ENTERE
NN When connecting a PC, you can only make changes to the Colour Tone
●● Colour Tone (Cool / Standard / Warm1 / Warm2)
NN Warm1 or Warm2 will be deactivated when the picture mode is Dynamic
39Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and
NN Available in AV, COMPONENT (480i / 1080i) and HDMI (1080i)
Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Removes
drag from fast scenes with a lot of movement to provide a clearer picture
NN The Info screen on your TV displays the resolution and frequency of the
incoming signal (60Hz), but not the frequency the TV is generating for the
image it is displaying by using Motion Plus function
NN If noise occurs on the screen, please set up the Motion Plus to Off. If
Motion Plus is Custom, you can set up the Blur Reduction, Judder
Reduction or Reset manually
NN If Motion Plus is Demo, you can compare the difference of on and off
modes
41❑❑ Setting up the TV with Your PC
42■■ PC Screen Adjustment
OO MENUm→ Picture → Screen Adjustment → PC Screen Adjustment →
ENTERE
that it is aligned to the centre of screen
Position: Adjusts the PC screen position with direction button (u/ d/ l/ r)
Image Reset: Resets the image to the default settings
43Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
1.Click on “Control Panel” on the Windows start menu
2.Click on “Appearance and Themes” in the “Control Panel” window and a display
dialog-boxwill appear
3.Click on “Display” and a display dialog box will appear
4.Navigate to the “Settings” tab on the display dialog-box
●● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels]
44❑❑ Changing the Preset Sound Mode
45❑❑ Adjusting Sound Settings
46●● SRS TruDialog (Off / On)
SRS CS Headphone
48■■ 3D Audio (Off / Low / Medium / High)
51■■ Additional Settings
DTV Audio Level (MPEG / HE-AAC):This function allows you to reduce the
TV broadcast) to a desired level
NN According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dBand 0dB
NN To increase or decrease the volume, adjust between the range 0 and
respectively
52as a DVD player
Audio Format: You can select the Digital Audio output (SPDIF) format
the input source
AV receiver (0ms ~ 250ms)
56❑❑ Selecting the Dual f-g
57❑❑ Setting the Network
60If you have a Dynamic Network, you should use an ADSL modem or router
that supports Dynamic Host Configuration Protocol (DHCP). Modems and
have to enter them manually. Most home networks are Dynamic Networks
Some networks require a Static IP address. If your network requires a Static
IP address, you must enter the IP address, subnet mask, gateway, and DNS
connection. To get the IP address, subnet mask, gateway, and DNS values
you can also get these values through your computer
IP addresses
62■■ Network Setup (Auto)
Network Setup
How to set up automatically
1.Go to Network Setting screen
To enter it, follow the directions of Network Setting
◀2. Select the Wired
3. The network test screen appears, and network setting is done
63NN If it fails to set automatically, check the connection of LAN port
68nearby, this will result in interference and communication failure
If you apply a security system other than the systems listed below, it will not
work with the TV
If Pure High-throughput(Greenfield) 802.11n mode is selected and the
Fi certification specifications
If your wireless router supports WPS (Wi-FiProtected Setup), you can
in either mode
70■■ Connecting to a Wireless Network for LED 6600 Series and above
71To use a wireless network, your TV must be connected to a wireless IP sharer
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV
74◀How to set up automatically
Go to
2.Select the Wireless
79■■ Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
Go to
Select the WPS(PBC)
Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network
The network test screen appears, and
network setting is done
81How to set up using One Foot Connection
Turn on the power of wireless router and TV
Go to Network Settings screen. To enter it
follow the directions of Network Settings
Select the One Foot Connection
Place the wireless router in parallel with the
no larger than 25cm
83■■ Network Settings (Plug & Access)
NN You can check for equipment that supports Plug&Access on www.samsung. com
855.Place the wireless router in a desired location
87If Your TV Fails to Connect to the Internet
88❑❑ Setting the Time
90Setting the On / Off Timer
On Timer
: Three different on timer settings can be made. You must set the clock first
◀the timer
N The cmark indicates the day is selected
94❑❑ Locking Programme
95Programme Rating Lock
●● Change PIN: Change your personal ID number required to set up the TV
→4 → POWER (on)
96❑❑ Economical Solutions
98OO MENUm→ System → ENTERE
■■ Language
Teletext Language: Set a desired language for teletext
the broadcast
Preference (Primary Audio Language / Secondary Audio Language
Primary Subtitle Language / Secondary Subtitle Language / Primary
Teletext Language / Secondary Teletext Language): Select a language
which will be the default language when a channel is selected
■■ Subtitle
Use this menu to set the Subtitle mode
●● Subtitle (Off / On): Switches subtitles on or off
●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode
103❑❑ Picture In Picture (PIP)
106❑❑ Support Menu
107Sound Test (Yes / No): Use the built-inmelody sound to check for sound
problems
test, make sure Speaker Select is set to TV Speaker in the Sound menu
NN The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button
signal strength
109Installing the Latest Version
By USB: Insert a USB drive containing the
firmware upgrade file, downloaded from
“www.samsung.com,” into the TV. Please
be careful not to disconnect the power or
remove the USB drive until upgrades are
complete. The TV will be turned off and on
automatically after completing the firmware
upgrade. When software is upgraded
110By Online: Upgrade the software using the Internet
Setup, refer to the “Network Connection” instructions
broken. Please retry downloading. If the problem persists, download by
USB and upgrade
By Channel: Upgrade the software using the broadcasting signal
NN This function may not be supported depending on the language
will be automatically searched and downloaded
NN The time required to download the software is determined by the signal
status
111Alternative Software
◀ ■■ Contact Samsung
View this information when your TV does not work properly or when you want to
to download products and software
112❑❑ Using the 3D function
113❑❑ Viewing TV using the 3D function
122Before using 3D function
NN Recommended 3D operating distance
124is optimized
The 3D Active Glasses may not work properly if there is any other 3D
Active Glasses
3D effects
125❑❑ Getting Started with Smart Hub
126The Gateway to all content integrated in one place
●● Customize your TV, by App grouping & sorting to your taste
127Screen Display
130Account Login
For an application with multiple accounts, select
^to access the different accounts
1311.Press the Red button in the Smart Hub home page
2.Select ^by pressing the u/ d/ l/ rbutton. The account list appears
Create Account
3.Select the desired Smart Hub ID, and the press the ENTEREbutton
1344-4.Press the TTX/MIX button on the remote 4 times to change the input mode
from numbers to upper case
4-5.Press the 2 button on the remote 3 times to input C
from upper case to lower case
the ENTEREbutton
Method 2: Using the Keypad of T9 type
For example, suppose that you want to input “105Chang”
136●● You can delete the entered character using the PRE-CHbutton
the screen
NN If you want to register service later, select Connect Later
138❑Setting up Smart Hub
139Service Manager
Ticker Autorun: You can set Ticker Autorun to come on when powering on the
NN The Ticker application provides useful News, Weather, and Stock Market
this feature
not be supported
Channel Bound Service (Off / On): Some channels support applications as an
NN Only available if supported by the broadcaster
142❑❑ Using the Smart Hub service
145Using the Samsung Apps by category
The following categories are available:
What’s New?: Displays newly registered applications
videos
Game: Displays various games such as sudoku and chess
Sports: Displays various sports media such as match information, images and
short length video
management tools and social networking such as Facebook and Twitter
147[Legal Statement]
membership fees that are sold separately. Please visit http://www.samsung
The services and availability of content through Smart Hub are subject to
change from time to time without prior notice
148Skype
Skype created a little piece of software that
And if both of you are on Skype, it’s free
Communicate with people around the world
150scrolled may cause corrupted characters
ActiveX is not supported
Some options cannot be accessed in Tab mode. (To access such options
switch to Pointer mode.)
Some text may appear corrupted because the number of supported fonts is
limited
The response to a command on the remote or the screen display may be
delayed temporarily if a web page is currently loading
12.The loading of a web page may delay or stop with some web pages
13.Copy and Paste are not supported
15115.The number of bookmarks and logs that can be saved is limited
17.The web browsing speed depends on the network conditions
may not commence playback after PIP interruption and a possible refresh for
the page may be required
19.The Web Browser can play MP3 audio files only
152When you import or export the bookmark, the folder tree is not included
be saved in “Samsung SmartTV Bookmark” folder
If the time is not set in the menu (System → Time → Clock), the history
information may not be saved
from the list according to oldest page accessed
the video/audio codec supported
153❑❑ Troubleshooting for SMART HUB
156❑❑ About AllShare™
158❑❑ Setting Up AllShare™
159■■ Media
Media
NN The Media function is available in all devices which support DLNA DMC
Allowed / Denied: Allows/Blocks the the devices
Delete: Deletes the devices from the list
device is turned on or tries to connect to the TV, it may appear on the list
again
160Using the Media Function
If the media function executes for the first time, the warning popup window
appears. Press the ENTEREbutton to select Allow, then you can use Media
function on that device
163on your TV and the Digital Audio Input on the Home Theatre
speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e
Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV
165Anynet+ Menu
166❑❑ Setting Up Anynet+
167❑❑ Switching between Anynet+ Devices
168❑❑ Listening through a Receiver
169❑❑ Troubleshooting for Anynet+
172❑❑ Using the Smart Hub
173❑❑ Connecting a USB Device
174❑❑ Connecting to the PC through network
175Photos, Music
NN DivX DRM, Multi-audio,embedded captions are not supported
178file damage or data loss
Connect a USB HDD to the dedicated USB 1 (HDD) port
Do not disconnect the USB device while it is loading
The higher the resolution of the image, the longer it takes to display on the
The maximum supported JPEG resolution is 15360X8640 pixels
is displayed
folder
180If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run
The power-savingmode of some external hard disk drives may be released
automatically when connected to the TV
files on the device may not be read
If a USB device connected to the TV is not recognized, the list of files on the
the PC, format the device and check the connection
182Recorded TV
188current recording process will be closed
When recording is performed by both the PVR (Personal Video Recorder)
PVR function takes precedence
to the display settings of the TV
If you change the input source during recording, the screen will go blank
until the change is completed
190●● If a USB device dedicated to recording is connected, existing Timeshift or
continue but the �(REC) button will be disabled
Off timer
193●● Supported Subtitle Formats
194●● Supported Video Formats
199■■ Music
Playing Music
1. Press the l/ r/ u/ dbutton to select the
desired music file in the file list
2. Press the ENTEREbutton or �(Play)
●● During playing the music, you can search
NN Only displays the files with MP3 extension
203■■ Photos
Viewing a Photo (or Slide Show)
1.Press the l/r/u/dbutton to select the desired file in the file list
2.Press the ENTEREbutton
◀ immediately
●● All files in the file list section will be displayed in the slide show
Background Music
NN The Background Music cannot be changed until the BGM has finished loading
204❑❑ Media Contents - Additional Function
206Videos / Music / Photos Play Option menu
210❑❑ Troubleshooting
223❑❑ Teletext Feature
227Typical Teletext page
228❑❑ Licence

Models

Contents