Samsung SR8845 [ Display panel ], DISPLAY PART, BUTTON PART, Assembling the cleaner, NAME OF EACH PART, _19, 4.Recharging, 6.Start/Stop, 7.Cleaning Mode, 1.Number Display

Assembling the cleaner

NAME OF EACH PART

[ Display panel ]

6 1

		3
5		2
	Ⓐ Ⓑ Ⓒ Ⓓ	4

7 8 9

DISPLAY PART

1.Number Display

-Shows the timer display, progress status, and error codes using numbers, letters and graphics.

2.Battery Level Indicator

-Charging: Shows the charging progress in 3 steps.

-In Use: Shows the battery charge level. The battery charge level is reduced by each level from FULL while operating. (When the battery is fully discharged, one level will fl ash to display “LO”.)

3.Scheduled Cleaning

-When cleaning is scheduled, the Scheduled Cleaning icon is lit.

4.Recharging

-This icon turns on when the robotic vacuum cleaner returns to the charger station to charge its battery.

5.Cleaning Mode Display

-Each time the cleaning mode button is pressed, the corresponding cleaning mode is displayed.

(a)Auto Mode: This icon turns on when Auto cleaning mode is selected.

(b)Spot Mode: This icon turns on when Spot cleaning mode is selected.

(c)Max Mode: This icon turns on when Max cleaning mode is selected.

(d)Manual Mode: This icon turns on when Manual cleaning mode is selected.

(e)Edge Mode : " " is on when Edge cleaning mode is selected.

BUTTON PART

6.Start/Stop

-Press to start/stop cleaning.

7.Cleaning Mode

-Press to select a cleaning mode. After selecting a cleaning mode, press the ( ) button to start cleaning.

8.Delay Start

-Press to schedule a cleaning. You can delay a cleaning up to 23 hours.

9.Recharging

-When this button is pressed, the Recharging icon is turned on and robotic vacuum cleaner will return to the charger station to charge its battery.

CLEANER THE ASSEMBLING 02

Assembling the cleaner _19