Operating the cleaner
INSTALLING THE ROBOTIC VACUUM CLEANER
INSTALLING THE VIRTUAL GUARDYou can confi ne the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode or clean several sections one by one using Guard (virtual door) mode.
| Mode/Power |
Mode Lamp | Button |
| |
| Main Unit |
| Detection |
Distance Detection | Sensor |
| |
Sensor |
|
1. Mode lamp operations
- Fence (virtual wall) Mode: The red lamp fl ashes.
-Guard (virtual door) Mode: The green lamp fl ashes.
-Off: The lamp is turned off.
2.Setting the mode
-Whenever you press the Mode/Power button, Fence
(virtual wall) mode ➝ Guard (virtual door) mode ➝ Power off is selected in this sequence.
✽The distance of virtual wall is 2.5M at minimum and may differ depending on surroundings and movement status of the robot.
Forming a Fence (virtual wall)VIRTUAL GUARD creates an invisible barrier that the |
|
robotic vacuum cleaner cannot cross. |
|
E.g. in front of pots, furniture, the front door, and so on. | Distance |
| Detection |
1. Select Fence (virtual wall) mode using the Mode/ | Sensor |
| |
Power button. |
|
- The mode lamp fl ashes red. |
|
|
2. Install the VIRTUAL GUARD in front of the area you want to block access from the robotic vacuum cleaner.
-Install the VIRTUAL GUARD so that the distance detection sensor can form an invisible barrier that the robotic vacuum cleaner cannot cross.
24_ Operating the cleaner