preparation
• Use the |
| |
• | The battery pack may be charged a little at the time of purchase. | Insert |
• | Be sure to charge the battery pack before you start using your miniDV camcorder. |
|
• Make sure that word mark (SAMSUNG) is facing out while the camcorder is placed as shown in the diagram.
3. Slide the BATT. release switch and pull out the battery pack.• Gently slide the BATT. release switch in the direction as shown in the diagram.
• | Additional battery packs are available at your local Samsung dealer. |
|
• | If the miniDV camcorder will not be in use for a while, remove the battery |
|
| pack from the miniDV camcorder. | Eject |
|
|
| P |
BATT. | O |
WE | |
| R |
| P |
BATT. | O |
W | |
| E |
| R |
| C |
5.Once charged, disconnect the AC power adaptor from the DC IN jack on your camcorder.
•Even with the power switched off, the battery pack will still discharge if it is left inserted in the camcorder.
It is recommended that you purchase one or more additional battery packs to allow continuous use of your miniDV camcorder.
| P |
BATT. | O |
WE | |
| R |
| BATT. |
| P |
BATT. | O |
W | |
| E |
| R |
| C |
Use only
Samsung is not responsible for problems occured due to using unapproved batteries.
14_ English