INSTALLING THE BUTTON-TYPE BATTERY

Button-type battery installation for the remote control (VP-D382( i )/D382H/D385( i ) only)

1. Pull out the button-type battery holder toward the direction of the arrow.

2. Position the button-type battery in the button-type battery holder, with the positive ( ) terminal face up.

3.Reinsert the button-type battery holder.

Precaution regarding the button-type battery

•There is a danger of explosion if button-type battery is incorrectly replaced. Replace only with the same or equivalent type.

•Do not pick up the battery using tweezers or other metal tools. This will cause a short circuit.

•Do not recharge, disassemble, heat or immerse the battery in water to avoid the risk of explosion.

Keep the button-type Battery out of reach of children. Should a battery be swallowed, seek medical attention immediately.

WARNING

English _13