| NOTE |
| Connect the hose guide (A) within 4 in (10 |
| cm)* from the end of the drain hose. If the |
| drain hose is extended more than 4 in (10 |
* | cm) beyond the end of the hose guide, mold |
or microorganisms could spread to the | |
A | inside of the washer. |
The drain hose can be installed to a 96 in (245 cm) maximum, but the draining capability can be reduced at this height. It can cause the washer to have an odor because of remaining water in the drain system.
If the drain hose is installed below 39 in (99 cm), water can be drained in cycles due to a siphon phenomenon. It causes the washer to display “4C”.
STEP 4 Leveling your washer
See if the washer is level by checking the position of the tub:
1. Slide the washer into position.
2. Open the lid of the washer, and pour the water into the tub to just below the pulsator level.
A
English 23
Installation