When the cycle is finished: | 1. | Open the lid. |
After the total cycle has finished, the power | 2. | Remove laundry. |
|
| |
will turn off automatically. |
|
|
ATC (Auto Temperature Control)
ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).
Because there are numerous water temperatures depending on the customer’s environments (cold areas, warm areas, various water temperatures, settings of heater temperature, etc.), ATC function in our washer maintains the certain level of wash temperature to output the best washing performance at each cycle.
If you select NORMAL, this cycle is the regulation and UL cycle. Since new washers must reduce the amount of energy usage as a first priority, customers will notice more cold water entering the washer. But, this is normal, not a problem.
In those regulation cycles, Hot temperature is similar to acceptable adult
If customers want to wash clothes in specific water temperatures, customers should choose a different cycle at each temperature (Hot/Warm).
laundry of load a Washing
English 35