91
LS9-16/32 Owner’s Manual
8
Custom fader layer
Chapter 8
Custom fader layer
This chapter explains how to assign the desired channels to the custom
fader layer.
The channel module section and ST IN channel section on the top panel of the LS9 consists of
four layers called “fader layers.”
When you switch between these fader layers, you are changing the channels that will be controlled by the faders, encoders,
[ON] keys, and [SEL] keys of the channel module section and ST IN channel section.
Use the keys of the LAYER section to switch fader layers.
About the custom fader layer
Fader layer 1-16 {1-32}
Fader layer 17-32 {33-64}
Master fader layer
Custom fader layer
LS9-16 LS9-32
Fader layer 1-16 Fader layer 17-32
Master fader layer Custom fader layer
Fader layer 1-32 Fader layer 33-64
Master fader layer Custom fader layer