95
LS9-16/32 Owner’s Manual
9
Input/output patching
Chapter 9
Input/output patching
This chapter explains how to edit the input patching and output patching,
how to connect inserts, and how to use direct outputs.
When the LS9 is in the initial state, the output ports (jacks and internal ports) are patched to the
following output channels.
However, the above patching can be modified as needed.
If you want to change the output patching, you can either
select the output port that will be the output destination for
each channel, or you can select the channel that will be the
output source for each output port.
●Selecting the output port for each out-
put channel
Here’s how to select the output port that will be the output
destination for each output channel.
1Press the [HOME] key to access the
SELECTED CH VIEW screen, and use the
[SEL] keys to select an output channel.
1Channel number / Channel name
BPATCH popup button
CPort select popup button
Changing the output patching
For the LS9-16
Output port (jack / internal port) Output channels
OMNI OUT jacks 1–6 MIX channels 1–6
OMNI OUT jacks 7–8 STEREO L/R channel
Slot output channels 1–8 MIX channels 1–8
Slot output channels 9–16 MIX channels 9–16
Rack inputs 5A (L), 6A (L), 7A (L), 8A (L) MIX channels 13–16
2TR OUT DIGITAL jack (L/R) STEREO L/R channel
USB memory recorder input (L/R) STEREO L/R channel
For the LS9-32
Output port (jack / internal port) Output channels
OMNI OUT jacks 1–12 MIX channels 1–12
OMNI OUT jacks 13–14 MATRIX channels 1–2
OMNI OUT jacks 15–16 STEREO L/R channel
Slot 1 output channels 1–8 MIX channels 1–8
Slot 1 output channels 9–16 MIX channels 9–16
Slot 2 output channels 1–8 MIX channels 1–8
Slot 2 output channels 9–16 MIX channels 9–16
Rack inputs 5A (L), 6A (L), 7A (L), 8A (L) MIX channels 13–16
2TR OUT DIGITAL jack (L/R) STEREO L/R channel
USB memory recorder input (L/R) STEREO L/R channel
1 2 3
• As an alternative to using the PATCH popup button, you can
also select the output port in the PATCH/NAME popup win-
dow that appears when you move the cursor to the port select
popup button and press the [ENTER] key (
→
p. 69).
HINT