Liebert Power Supply manuals
Computer Equipment > Power Supply
When we buy new device such as Liebert Power Supply we often through away most of the documentation but the warranty.
Very often issues with Liebert Power Supply begin only after the warranty period ends and you may want to find how to repair it or just do some service work.
Even oftener it is hard to remember what does each function in Power Supply Liebert Power Supply is responsible for and what options to choose for expected result.
Fortunately you can find all manuals for Power Supply on our side using links below.
Liebert Power Supply Important Safety Instructions
14 pages 1.07 Mb
IMPORTANT SAFETY INSTRUCTIONS PowerSure Interactive USER MANUAL700-2200 VA 230 VINPUT OUTPUT TVSS and EMI/RFI Filters NN GG Battery Automatic Voltage Regulator Bi-Directional Converter LL 3 MINI-TOWER INSTALLATION 1. Unpack the UPS carefully noting the packing method. Retain the box and 2. Visually inspect the UPS for freight damage. Report damage to the carrier and 3. Locate the UPS where it cannot be accidentally disconnected. Locate it in an 4. Shutdown load equipment, turn off mains supply, and unplug load equipment's 5. 700-1400 VA models: unplug power input cable (A) from load equipment input 6. Connect the molded connector of the mains AC input supply cable into the UPS. 7. Fit the supplied retainer bracket around the input supply cable and secure the 8. The free end of the input 4 9. Connect the supplied IEC320-10 output cable (B) between the load equipment 10. Turn on the UPS by pressing the On button for at least one half second; then turn 1. Unpack the UPS carefully noting the packing method. Retain box and packing 2. Visually inspect the UPS for freight damage. Report any damage to the carrier 3. Locate the UPS indoors where it cannot be accidentally disconnected. Locate it 4. Gently lay UPS on its bottom side so that the front bezel is facing you. 5. The Rackmount UPS must be supported by a shelf or rails. The front bezel will 6. Refer to the Installation instructions supplied with the Rack Slide or Shelf Kits to 7. 700-1400 VA models: unplug power input cable (A) from load equipment input 8. Connect the molded connector of the mains AC input supply cable into the UPS. 9. Fit the supplied retainer bracket around the input supply cable and secure the 10. Ensuring load equipment is turned off, plug all loads into the UPS output 11. The free end of the input supply cable should be connected to the electrical 12. The wires in the mains lead are colored with the following code: 5 13. Connect the supplied IEC 320-10 output cable (B) between the load equipment 14. Turn on the UPS, by pressing the On/Off button, then turn on the connected load 6 2200 Model700 Model 1000/1400 Model 12 BATTERY DISCHARGE CURVES (Discharge times are at 25 C ambient) NOTE: For 1000, 1400, and 2200 VA units press the reset circuit protector button. 700 VA 1000 VA 1400 VA 2200 VA FUSE REPLACEMENT PROCEDURES MODELS 2. Remove the input fuse. 3. Remove the spare fuse from its position by using the screw driver to push it out. 5. Reconnect the input power lead to the UPS, and the input power lead to the input AC supply. 6. Restart the UPS. The UPS is ready for normal operation. 23 24 Technical Support 14 700-2200 VA 230 VPowerSure Interactive LIMITED WARRANTY
Also you can find more Liebert manuals or manuals for other Computer Equipment.