Liebert Power Supply important safety instructions Important Safety Instructions

POWER PROTECTION

R

PowerSure™ Interactive

700-2200 VA

230 V

USER MANUAL

English

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Do not attempt to service this product yourself except to replace the battery. Opening or removing the cover may expose you to dangerous voltages, even when the AC cord is disconnected from the electrical outlet. Refer all servicing to qualified service personnel.

1.SAVE THESE INSTRUCTIONS. THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS. Read all safety and operating instructions before operating the Uninterruptible Power System (UPS). Adhere to all warnings on the unit and in this manual. Follow all operating and user instructions.

2.This product is designed for Commercial/Industrial use only. It is not intended for use with life support and other designated “critical” devices. Maximum load must not exceed that shown on the UPS rating label. If uncertain, consult your dealer. See Limited Warranty.

3.When replacing the batteries, use the appropriate Liebert-Approved Replacement Battery Kit. Proper disposal of batteries is required. Refer to your local laws and regulations for disposal requirements.

4.Always turn off the UPS and unplug it before starting the battery replacement procedure. To replace batteries, refer to the battery replacement procedure. If you feel unqualified to replace the batteries, do not open the battery door. Refer all servicing to qualified service personnel.

5.CAUTION: Do not open or mutilate the batteries. Released electrolyte is harmful to skin and eyes and may be toxic.

6.The mains supply socket or means of isolation must be within 2 metres of the equipment and accessible to the operator. The UPS is designed for data processing equipment.

7.The UPS comes with two output power leads with moulded connectors. Do not modify the output power leads. Consult dealer if connector does not match the load socket. UPS must be earthed at all times while in use. Turn UPS off before unplugging it, or the safety earth will be removed.

8.The PowerSure Interactive models 700 VA, 1000 VA, and 1400 VA are not supplied with an input power lead for connection to the mains supply socket. Use the input mains supply power lead from your data processing equipment to connect the UPS to the mains supply. For the 2200 VA model, use the supplied 16 ampere rated input mains supply leads. For UK supply systems, consult a qualified electrician to connect the lead supplied for the 2200 VA model to the mains supply. Note caution on following page.

2