Sunfire HRS-10 manuals

Home Audio > Speaker

When we buy new device such as Sunfire HRS-10 we often through away most of the documentation but the warranty. Very often issues with Sunfire HRS-10 begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Speaker Sunfire HRS-10 is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Speaker on our side using links below.

Sunfire HRS-10 User Manual

20 pages1.79 Mb

2Important Safety Instructions
3Contents
- 4Features
- Care
- Introduction
- Unpacking
- 5Overview
  - The Driver
  - The Tracking Downconverter Amplier
  - Sub/LFE
  - 1. Power Indicator
  - 2. Power Switch
  - 3. IEC Power Connector
  - 4. AC Line Fuse
  - 5. Speaker-Level Inputs
- 6Control Panel Features
  - 5 6 7 8 9 10
  - 1 2
  - 3 4
    - 76. Line-Level Inputs
    - 7. High-Pass Outputs
    - 8. Crossover Frequency
    - 9. Phase
    - 10. Volume
- 8Installation
  - Heat
  - AC Power Considerations
  - Magnetic Fields
- 9Connections
  - Speaker-level connections
    - Tape Deck DVD Preamplifier Power strip
    - Subwoofer
    - Amplifier AC outlets on the same circuit breaker
- 10Location
  - Magnetic Fields
  - Using two Subwoofers
- 11System Congurations
  - Connections to a preampliers subwoofer output
  - 12Connections using Y cables
  - 13Using the line-level high-pass outputs
  - 14Using the speaker-level inputs
- 15Adjusting the controls
  - Record your favorite settings here:
  - Note:
- 16Specications
- 17Troubleshooting
  - Not enough bass
  - Not enough bass in a 5.1 system
  - 18Hum
  - No auto turn off
  - No auto turn on
- 19Limited Warranty
  - Service Assistance

Also you can find more Sunfire manuals or manuals for other Home Audio.