Specifications
Amplifier Output
1,000 watts rms
High Cut Filter
30 Hz - 100 Hz adjustable. The crossover can be bypassed by rotating the crossover frequency control fully clockwise.
Frequency Response
Power Line Voltage
120 VAC 50/60 Hz version
230 VAC 50/60 Hz version
Dimensions
Weight
Finish
Line power consumption:
600 watts average, at maximum continu- ous output, 18 to 100 Hz.
2,000 watts peak, time limited basis.
Output levels:
Peak SPL (including room gain):
102 dB | |
105 dB | |
108 dB |
Input sensitivity for full output:
240 mVrms from left input with volume control at 0 dB, 90 mVrms with volume control fully clockwise.
0.48Vrms from right input with volume control at 0 dB, 180 mVrms with volume control fully clockwise.
Input impedance:
30 KΩ for
5.6 KΩ for speaker or
Drivers:
Internal system gain:
42 dB from left input jack to subwoofer with volume control at 0dB.
54 dB with control fully clockwise.
36 dB from right input jack to subwoofer with volume control at 0dB,
48 dB with control fully clockwise.
© 2007 Sunfire Corporation.
All rights reserved. Sunfire Corporation reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.
Manual
16 User's Manual