Superior BCI-36 manuals

Superior BCI-36 Installation Instructions

20 pages318.32 Kb

36" Wood Burning Fireplaces P/N 700,040M REV. A 02/2008
BR-36 BC-36 BRI-36 BCI-36 BR-36-2 BC-36-2
MODELS
- RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
STANDARD SERIES
- INSTALLATION INSTRUCTIONS
  - 2TABLE OF CONTENTS
  - IMPORTANT: PLEASE READ AND UNDERSTAND THESE RULES TO FOLLOW FOR SAFETY.
    - TOOLS AND BUILDING SUPPLIES NORMALLY REQUIRED
      - Figure 1
  - 3TYPICAL INSTALLATION
    - PRECAUTIONS
    - INTRODUCTION General Information
    - CLEARANCES AND HEIGHT REQUIREMENTS
    - CHIMNEY SYSTEM
      - **Note: 2" clearance to combustibles around chimney components required in Canada.
    - Figure 2
    - 4Chimney Height
      - Figure 5
      - Figure 3
      - Figure 2
      - Figure 5
    - LOCATION OF FIREPLACE
      - Figure 4
    - Chase Enclosure
    - ASSEMBLY OUTLINE Before You Start
    - Note: Install the hearth extension only as illus- trated.
    - Figures 8 and 9
    - Note: The Z type safety strip is not supplied.
    - 5CLEARANCES
      - Figure 7
    - INSTALLING THE FIREPLACE
      - Figures 6, 7 and 8
      - Note: Safety strips are not required when fire- place rests on a noncombustible surface.
    - ASSEMBLY STEPS
      - Figure 6
      - Fig- ure 1
    - PRE-INSTALLATION NOTES
  - 6FIREPLACE SPECIFICATIONS
    - Metal Safety Strips
    - Top View
    - Front (BC Model Shown)
    - Figure 10
      - Blocking
    - Figures 11 through 14
      - Metal Safety Strips
    - Figure 8
    - Figure 9
      - on page 8. IMPORTANT: UNDER NO CIRCUMSTANCES CAN THE FIREPLACE TOP SPACERS (
    - FIGURE 10
    - 1-1/2"
    - Left Side Right Side
  - 7FRAMING SPECIFICATIONS
    - Figure 14
    - Figure 11
    - Figure 13
    - Figure 12
    - Figure 15
    - Figure 16
    - 8For Canadian Installations Proceed with Steps 5 through 8
    - INSTALLING THE CHIMNEY SYSTEM
    - 9CHIMNEY 30 OFFSET THROUGH FLOOR OR CEILING
    - For Canada Only
      - Figure 34
      - Figure 35
      - refer to Figure 34
    - 11FTF8 CHIMNEY COMPONENT CALCULATIONS
    - SPECIAL OFFSET INSTRUCTIONS
    - MULTIPLE TERMINATIONS
      - Figure 35
    - TEN FOOT RULE SUMMARY
      - Figure 36
      - Figure 37
      - Figure 28
      - Figures 22 and 23
      - Figure 39
      - Figure 38
    - OFFSET CALCULATIONS
  - 12FTF8 VERTICAL ELEVATION CHART
    - Figure 37
    - Figure 36
  - 13OFFSET ELEVATION CHART
    - 14Offset Elbow Assembly
    - Return Elbow Assembly
    - OPTIONAL EQUIPMENT CONSIDERATIONS Blower Kits (Circulating Models Only)
    - INSTALLING OFFSETS
      - Figure 42
      - Figure 43
    - 15Combustion Air Kits
    - Gas Line Connection
    - Vent Free Appliances
    - 16FIREPLACE FINISHES Mantels and Trim
      - Figure 48 )
      - Figures 6 & 7)
      - Page 17
      - Figure 45
      - *Note: 2" clearance to combustibles required in Canada.
    - Glass Doors
    - COLD CLIMATE INSULATION
    - Hearth Extensions and Wall Shields
      - see Figure 47 )
      - Figure 47
        Table 1
    - 17Methods of Determini
      - Table 1
      - Note:
    - FINISH TO YOUR TASTE
    - 18FIGURE 50
      - Note:
      - ).
    - FIGURE 49
      - ).
        Figure 51
        Figure 50
        Example:
        Figure 48
        Figure 49
      - brick
      - mortar
      - marble
      - mortar
      - Shipping Weight 175 lbs.
      - 19INSTALLATION COMPONENTS
        The following items are available for use in the installation of this appliance.
        **Note: 2" clearance required for Canadian Installation - as applicable.
      - 20LHP
      - INSTALLATION COMPONENTS
        **Note: 2" clearance required for Canadian Installation - as applicable.