1. Foreword

You can operate up to 4 devices with the EasyControl 4 remote control: TV, VCR (video recorder), DVD, SAT

The remote control contains a large number of pre-programmed codes. These codes are suitable for almost all currently available devices and must be programmed once before use. There are various ways to do this:

a.By manually entering one of the codes for the relevant brand that can be found in the accompanying code book (see figure 4.1).

b.By using Auto Search to find common brands (see figure 4.2).

c.By using Auto Search for all brands (see figure 4.3).

d.By manually checking all the codes (see figure 4.4).

2.Inserting batteries(always use NEW AAA-alkaline batteries)

1.Open the battery compartment at the back of the remote control.

2.Insert 2 AAA-alkaline batteries. Ensure that the polarity is correct (+ and -) and follow the instructions on the lid.

3.Carefully close the battery compartment.

3.Button functions

[1] (On/off)

Switches the last selected device off. Some appliances can also be switched on by pressing this button.

[2] RED LED indicator

The indicator light flashes when the remote is operating or lights continuously while you are programming the remote.

[3] TV, VCR, DVD, SAT

You can select which device you want to operate by using these mode buttons. There are a limited number of functions available for audio.

[4] Mute

Switches the sound on or off. You can also turn the volume of your TV on or off whenever you are in VCR, DVD or SAT mode. This means that you do not have to switch over to TV mode.

[5] PROG +/-

Selects the next or previous channel on your TV or satellite receiver. In DVD mode it selects the next or previous track.

4

MARMITEK - NICOSHOP