[6] VOL +/-

Controls the volume. You can adjust the volume, also when you are in VCR, DVD or SAT mode. You do not need to switch over to TV mode.

[7] INFO

Provides on-screen information for the device selected (if available).

[8] SETUP

This is where you program the remote control for use. This button gives access to some of the secondary functions of certain audio/video equipment (Shift). Press the SETUP button and then the desired function button.

[9] Numeric keys 0-9

These work just like a normal remote control.

[10] AV

Selects an external audio or video source (via the A/V or Scart in).

[11] -/--

This button allows you, on some devices, to choose channels that have a number higher than 9 (two digits). If you are using the Setup mode and are automatically searching for codes, you can use this button to enter the code for the device.

[12]MENU Activates the menu.

[13]EXIT

Exits the menu.

[14] OK

Confirms the menu selection.

[15] Navigation buttons

Up, down, left, right, to be used to navigate through the menu (TV, DVD etc.).

[16]

Teletext ON: Start/stop Teletext.

Teletext OFF: Stop teletext.

Teletext Hold: Hold the page in Teletext mode.

Teletext Mix (TVand SAT): Shows Teletext and the images of the selected channel.

[17] REW (rewind)

In VCR, DVD or SAT mode: Works just like the button on the original remote control.

In TV mode: Coloured button (red), operates Teletext – or other device functions.

ENGLISH

EASYCONTROL 4

5