Epson PowerLite 7900p Projector

The following tables explain the status, video source, and error icons.

Status icons

(green)

Projecting; no problems

 

 

 

(dark)

Turned off; no problems

 

 

 

(green)

Projecting; problems detected

 

 

 

(dark)

Turned off; problems detected

 

 

 

 

Network error (for example, not connected to

 

network or power cable disconnected).

 

You may also see this error if Network OFF is

 

selected in Standby Mode.

 

 

Video source icons

Computer, Computer1, or InputA

Computer2 or InputB

S-Video

Video

D4 (Digital)

DVI or HDMI (Digital)

Error icons

Lamp replacement notification (the lamp is nearing the end of its life; see page 21)

High-speed cooling in progress (the projector is getting too hot but continues to operate)

Overheating (projection turned off automatically)

Lamp out or lamp cover open

Fan error

Sensor error

Controlling Your Projectors

The control buttons in the upper-right of the EMP Monitor screen let you turn the projectors on and off and select video sources. (Hold the mouse pointer over a button to see a description of its meaning.) Make sure you’ve selected the projector(s) you want to operate before clicking one of the buttons.

Control buttons

Note: To turn on a projector when it’s in standby mode (plugged in but not projecting), you first select Network ON as the Standby Mode setting in the projector’s Advanced1 menu.

Configuring the Monitoring Interval

If you need to have the most current status information about your projectors, click the Refresh button in the EMP Monitor screen.

You can also select how often EMP Monitor checks the projector status:

1.From the Tool menu, select Configuration. You see this screen.

Note: If you want EMP Monitor to run whenever you start your computer, click Add to Startup.

2. Select the desired update interval and click OK.

9/04

Epson PowerLite 7900p Projector - 17