26CHAPTER 2: INSTALLING THE SWITCH
Figure 8 Fitting a bracket for wall-mounting
3Insert the two screws and tighten with a suitable screwdriver.
4Repeat steps 2 and 3 for the other side of the Switch.
5Ensure that the wall you are using is smooth, flat, dry and sturdy. Attach a piece of plywood, approximately 305mm x 510mm x 12mm (12in. x 20in.
x0.5in.) securely to the wall if necessary.
6Mount the Switch as follows:
aPosition the base of the Switch against the wall (or plywood) ensuring that the ventilation holes face sidewards and that the front of the unit faces downwards. Mark the position of the screw holes in both wall brackets on the wall. Drill the four holes.
bUsing suitable fixings and screws (not provided), attach the Switch securely to the wall or plywood.
cConnect network cabling.
