Stacking Units 29
3Connect the Matrix Cables, as shown in Figure10:
aConnect a Matrix Cable to the port marked Unit 1 on the Matrix
Module. Connect the other end of this cable to t he matrix port of the
Switch that contains the Matrix Module.
bConnect a second Matrix Cable to the port marked Unit 2 on the
Matrix Module. Connect the other end of this cable to the matrix port
of the second Switch.
cRepeat steps a and b for any additional Switch units.
Figure 10 A stack of multiple units
16950ua.bk Page 29 Thursd ay, August 27, 1998 11:55 AM