Setup Program 13
To setup the gateway for use with a PPP over Ethernet connection, use the
following procedure:
1Enter your PPP over Ethernet user name in the PPPoE User Name text box.
2Enter your PPP over Ethernet password in the PPPoE Password text box.
If you don’t want to change the password, leave this text box empty.
3Enter your PPP over Ethernet service name in the PPoE Service Name text box.
This is optional. Not all ISPs require a PPPoE service name.
4Enter a value in the Maximum Idle Time text box.
This value will correspond to the amount of idle time (no Internet activity), in
seconds, that will pass before the gateway automatically ends your PPP over
Ethernet session. Leave the text box blank to disable this function.
5Check all of your settings, and then click Reboot.
The gateway will restart, and your settings will be activated.
Dial-up Network
Activating the Dial-up Network radio button and then clicking SAVE & NEXT in the
Choose Internet Connection Configuration screen will generate the Primary Setup
screen for dial-up networking setup.
To setup the gateway for use with a dial-up connection, use the following
procedure:
1Enter your dial-up telephone number in the Dial-up Telephone Number text box.
2Enter your dial-up user name in the Dial-up User Name text box.
3Enter your dial-up password in the Dial-up Password text box.
4Enter your primary DNS address in the Primary DNS Address text box.
5Enter your secondary DNS address in the Secondary DNS Address text box.
This is optional. Not all ISPs require a secondary DNS address.
6Enter a value in the Maximum Idle Time text box.
This value will correspond to the amount of idle time (no Internet activity), in
seconds, that will pass before the gateway automatically ends your dial-up
session. Leaving the text box blank disables this function.