3Com 3CNJ100 manual Before You Begin

Installation Guide

Before You Begin

Before you begin installation, register your product at: www.3com.com/productreg.

The Network Jack is available in single- and 20-packs. Before you begin the installation, make sure you have the following items, which are included with the Network Jack:

■6x32 screws (2 per Network Jack) for mounting the Network Jack to the wall or office cubicle.

■RJ-45 coupler cable (1 per Network Jack) for connecting the Ethernet cable from the network to the Network Jack (required only if your network cable is terminated with a female RJ-45 connector).

■Installation guide (1 per package).

Additionally, the following items are shipped with the single pack:

■Adapter plates for installing connectors to use as pass- through ports. The adapter plates accommodate connectors from suppliers including:

■

■

Panduit (RJ-45 and RJ-11) Avaya (RJ-45 and RJ-11)

NOTE: The connectors for the adapter plates must be purchased from the manufacturer. For a list of supported connectors, go to www.3com.com/.

■Adapter plate screws (2) for mounting the adapter plate to the Network Jack.

6