Using Wireless LAN Manager

3
Using Wireless LAN Manager
Key Features contained within 3Com Wireless LAN Manager:
■Ad Hoc or Access Point connections
■Wide range of security settings: including
■64, 128, 152 bit WEP
■Light EAP
■802.1x - EAP-TLS, PEAP, EAP-TTLS, MD5
■WPA (WEP, TKIP, AES)
■3Com Dynamic Security Link
■Serial Authentication
■Multiple profile support with automatic profile activation capabilities
■Profiles can be imported and exported for easy multiple machine setup
■For each profile you can specify:
■SSID name
■Security settings
■Applications that will automatically launch, such as VPN software
■Default printer
■File and print sharing for each profile
■Static or Dynamic IP settings
■Autonomous Load Balancing for improved roaming.
After installation, consult with your network administrator and refer to 3Com's Wireless
LAN Manager on line help for detailed information about the Wireless LAN Manager
features and to change your default installation settings.
Getting Connected with 3Com Wireless LAN Manager
Your 3Com Wireless LAN PC card has been initially setup as follows:
■This has been set to allow you to connect to any Access Point without encryption or
authentication.
■Encryption: No encryption has been enabled.
If 3Com Wireless LAN Manager does not show an active connection or you want to
connect to a different wireless LAN network then you will need to create a new
connection.
NOTE: Wireless LAN Manager defaults to automatically connect to any wireless
network with no security. This default allows a basic connection to an open access
point.