3Com 8755H, 8912H, 8913H, 8916 5. , 2. , 4. , 3.

22

Operating

Using the menu function (continued)

● Some functions cannot be performed when a certain input port is selected, or

when a certain input signal is displayed.

● When you want to reset the operation, press RESET button on the remote

control during the operation. Note that some items (ex. LANGUAGE, H

PHASE, VOLUME) cannot be reset.

● In the Advanced Menu, when you want to return to the previous display, press

the ◄ cursor button or ESC button on the remote control.

5. Press MENU button on the remote control again to close the menu and

complete this operation. Even if you do not do anything, the dialog will

automatically disappear after about 10 seconds.

2. Use the ▲/▼ cursor buttons to select a menu.

If you want to change it to the EASY MENU, select

EASY MENU.

Then press the ► cursor button, or ENTER button to

select an item. The lower layer menu of the selected

item will appear.

In the Advanced Menu

3. Use the ▲/▼ cursor buttons to select an item to operate.

Then press the ► cursor button, or ENTER button to progress. The operation

menu of the selected item will appear.

4. Use the ▲/▼ cursor buttons to operate the item.

Advanced Menu

Contents

Main Projector 8755H / 8916 / 8913H / 8912H User's Manual (detailed) Operating Guide About this manual Contents Projector features Preparations Contents of package 1. 2. Part names Projector Control panel Rear panel CAUTION Remote control Setting up Arrangement Page Connecting your devices About Plug-and-Play capability Connecting your devices (continued) Connecting power supply 1. Using the security bar and slot 2. Remote control About the remote control signal 1. 2. 3. Changing the frequency of remote control signal Using as a simple PC mouse & keyboard 1. Turning on the power WARNING 2. 3. 1. Turning off the power 2. 3. Use the shutdown switch (61) only when the projector is not turned off by normal procedure. 1. Adjusting the volume 1. Temporarily muting the sound 1. Selecting an input signal 1. Selecting an input signal (continued) 1. Selecting an aspect ratio COMPONENT (Y, Cb/Pb, Cr/Pr) S-VIDEO VIDEO 1. Searching an input signal COMPUTER IN 1 COMPUTER IN 2 VIDEO S-VIDEO COMPONENT (Y, Cb/Pb, Cr/Pr) Page 1. Adjusting the position 2. 1. Using the automatic adjustment feature The zoom level can be nely adjusted. Closely watch the screen to nd the level you want. 1. Using the magnify feature 2. 1. Correcting the keystone distortions 2. 1. Temporarily blanking the screen 1. Freezing the screen 1. Using the menu function 4. 2. 3. 5. 2. 4. 3. EASY MENU EASY MENU (continued) PICTURE menu Page PICTURE menu (continued) IMAGE menu From the IMAGE menu, items shown in the table below IMAGE menu (continued) INPUT menu From the INPUT menu, items shown in the table below Page INPUT menu (continued) SETUP menu From the SETUP menu, items shown in the table below SETUP menu (continued) WHISPER MONITOR OUT STANDBY MODE MIRROR AUDIO menu SCREEN menu From the SCREEN menu, items shown in the table below Page Page Page OPTION menu From the OPTION menu, items shown in the table below Page MY BUTTON MY SOURCE VIDEO S-VIDEO COMPONENT SERVICE COMPUTER 1 COMPUTER 2 Page Page 1. Using Security Features 2. Using the MyScreen PASSWORD Function 3. Using the PIN LOCK Function Page 4. Using the Transition Detector Function 4.1 Turning On the Transition Detector Function 4.2 Setting the Transition Detector PASSWORD Page 5. Using the MY TEXT PASSWORD function 5.1 Writing the MY TEXT 5.2 Displaying the MY TEXT TURN ON TURN OFF 5.3 Turning on the MY TEXT PASSWORD C.C. (Closed Caption) menu Maintenance Replacing the lamp 1. 2. 7. 3. 4. Lamp warning HIGH TEMPERATURE HIGH VOLTAGE HIGH PRESSURE Cleaning and replacing the air lter 1. 2. 3. 4. 5. 6. 9. Other care 1. 2. 1. 2. Troubleshooting Related messages Regarding the indicator lamps The projector is in a standby state. The projector is warming up. The projector is in an on state. The projector is cooling down. Shutting the projector down Resetting all settings Phenomena that may be easy to be mistaken for machine defects Phenomena that may be easy to be mistaken for machine defects (continued) Phenomena that may be easy to be mistaken for machine defects (continued) Specications Specications Item Specications 8913H 8916