3Com 8755H, 8912H, 8913H, 8916 SETUP menu (continued)

34

SETUP menu

SETUP menu (continued)

Item Description

WHISPER

Using the ▲/▼ buttons turns off/on the whisper mode.

NORMAL ó WHISPER

•

When WHISPER is selected, acoustic noise and screen brightness are reduced.

MIRROR

Using the ▲/▼ buttons switches the mode for mirror status.

NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT

If the Transition Detector is TURN ON and MIRROR status is changed,

Transition Detector Alarm (49) will be displayed when projector is

restarted after the power switch is turned off.

STANDBY MODE

Using ▲/▼ buttons switches the standby mode setting between

NORMAL and SAVING.

NORMAL ó SAVING

When SAVING is selected, the power consumption in the standby mode

is lowered with some functional restriction as below:

•

When SAVING is selected, the RS-232C communication control is disabled

except to turn the projector on while the projector is in the standby mode.

• When SAVING is selected, any setting of the MONITOR OUT (

below) and AUDIO (35) in the standby mode is invalid, and no signal

is output from both of MONITOR OUT and AUDIO OUT ports in the

standby mode.

MONITOR OUT

The combination of a picture shown on screen and output from the

MONITOR OUT port can be arranged in the menu.

The picture coming into the port selected in the (2) is output to the

MONITOR OUT port while an image from the port chosen in the (1) is

on screen.

(1) Choose a picture input port using ▲/▼ buttons.

• Choose STANDBY, to select the output signal from the MONITOR

OUT port in the standby mode.

•

While QUIT is selected, pressing the ◄ button returns to the previous menu.

(2) Select one of the COMPUTER IN ports using ◄/► buttons.

Choosing the COMPUTER 1 allows the following choice.

1 (COMPUTER IN1) ó OFF

Choosing the COMPUTER 2 allows the following choice.

2 (COMPUTER IN2) ó OFF

Choosing other input or STANDBY allows the following choice.

1 (COMPUTER IN1) ó 2 (COMPUTER IN2) ó OFF

• OFF disables the MONITOR OUT port.

QUIT ó COMPUTER 1 ó COMPUTER 2



(COMPUTER IN1)

(COMPUTER IN2)

STANDBY



VIDEO ó S-VIDEO ó COMPONENT

(Y, Cb/Pb, Cr/Pr)

Contents

Main Projector 8755H / 8916 / 8913H / 8912H User's Manual (detailed) Operating Guide About this manual Contents Projector features Preparations Contents of package 1. 2. Part names Projector Control panel Rear panel CAUTION Remote control Setting up Arrangement Page Connecting your devices About Plug-and-Play capability Connecting your devices (continued) Connecting power supply 1. Using the security bar and slot 2. Remote control About the remote control signal 1. 2. 3. Changing the frequency of remote control signal Using as a simple PC mouse & keyboard 1. Turning on the power WARNING 2. 3. 1. Turning off the power 2. 3. Use the shutdown switch (61) only when the projector is not turned off by normal procedure. 1. Adjusting the volume 1. Temporarily muting the sound 1. Selecting an input signal 1. Selecting an input signal (continued) 1. Selecting an aspect ratio COMPONENT (Y, Cb/Pb, Cr/Pr) S-VIDEO VIDEO 1. Searching an input signal COMPUTER IN 1 COMPUTER IN 2 VIDEO S-VIDEO COMPONENT (Y, Cb/Pb, Cr/Pr) Page 1. Adjusting the position 2. 1. Using the automatic adjustment feature The zoom level can be nely adjusted. Closely watch the screen to nd the level you want. 1. Using the magnify feature 2. 1. Correcting the keystone distortions 2. 1. Temporarily blanking the screen 1. Freezing the screen 1. Using the menu function 4. 2. 3. 5. 2. 4. 3. EASY MENU EASY MENU (continued) PICTURE menu Page PICTURE menu (continued) IMAGE menu From the IMAGE menu, items shown in the table below IMAGE menu (continued) INPUT menu From the INPUT menu, items shown in the table below Page INPUT menu (continued) SETUP menu From the SETUP menu, items shown in the table below SETUP menu (continued) WHISPER MONITOR OUT STANDBY MODE MIRROR AUDIO menu SCREEN menu From the SCREEN menu, items shown in the table below Page Page Page OPTION menu From the OPTION menu, items shown in the table below Page MY BUTTON MY SOURCE VIDEO S-VIDEO COMPONENT SERVICE COMPUTER 1 COMPUTER 2 Page Page 1. Using Security Features 2. Using the MyScreen PASSWORD Function 3. Using the PIN LOCK Function Page 4. Using the Transition Detector Function 4.1 Turning On the Transition Detector Function 4.2 Setting the Transition Detector PASSWORD Page 5. Using the MY TEXT PASSWORD function 5.1 Writing the MY TEXT 5.2 Displaying the MY TEXT TURN ON TURN OFF 5.3 Turning on the MY TEXT PASSWORD C.C. (Closed Caption) menu Maintenance Replacing the lamp 1. 2. 7. 3. 4. Lamp warning HIGH TEMPERATURE HIGH VOLTAGE HIGH PRESSURE Cleaning and replacing the air lter 1. 2. 3. 4. 5. 6. 9. Other care 1. 2. 1. 2. Troubleshooting Related messages Regarding the indicator lamps The projector is in a standby state. The projector is warming up. The projector is in an on state. The projector is cooling down. Shutting the projector down Resetting all settings Phenomena that may be easy to be mistaken for machine defects Phenomena that may be easy to be mistaken for machine defects (continued) Phenomena that may be easy to be mistaken for machine defects (continued) Specications Specications Item Specications 8913H 8916