3Com manual Ethernet Hub 8 and 8C-Rear, 10BASE-2 port Hub 8C only

Ethernet Hub 8 and 8C—Rear

10BASE-2 port (Hub 8C only) Eight 10BASE-T RJ-45 ports

Can be used to connect your hub to other OfficeConnect hubs and equipment with 10BASE-2 cabling.

If used, it is effectively a ninth port.

Refer to “Connecting Hubs Using 10BASE-2” on page 20.

Use 10BASE-T cable with RJ-45 connectors. You can connect the OfficeConnect hub to any workstation or piece of equipment that has a 10BASE-T port. Port 8 can be used to link to another OfficeConnect hub. Refer to “Connecting Hubs Using 10BASE-T” on page 21.

Uplink/Normal 8

POWER COAX

Power Adapter socket	Uplink/Normal switch
Only use the power adapter that is	Affects the operation of port 8. For correct usage,
supplied with this OfficeConnect	refer to “Connecting Hubs Using 10BASE-T” on page 21.
hub. Do not use any other adapter.

1x

18