Figure 7 MP-104 Endpoint Phone Number Table

3Connect the RJ-11 cable of telephone A to port 1 of module 1 (where module 1 is an FXS module) on the V6000. Connect the RJ-11 cable of telephone B to port 1 on the MP-104 gateway.

4Offhook the receiver of telephone A (whose number you defined as 101) and dial 301; telephone B connected to the MP-104 rings.

5Offhook telephone B and test the line for voice.

To make a call from telephone B on the MP-104 to telephone A on the V6000, you must define the internal routing table on the MP-104.

26V6000 Analog Integrated Branch Office Solution Installation Guide V6000 Analog Integrated Branch Office Sol