3Com AP2750 Managed Access Point Features

Antenna

LEDsConnectors

Reset

Button

Power Port

Serial Port

Ethernet Port

	Mounting
	Bracket

Feature	Description

Power Port	The access point can be powered either via Power Over Ethernet (PoE), or by an
	external power supply (not included) that is plugged into the Power Port.
Serial Port	The serial port is not supported.
Ethernet Port	The Ethernet port provides a 10/100BASE-TX Ethernet connection to a 3Com Wireless
	LAN switch. The connection can be direct to a 3Com switch or indirect through an
	intermediate Layer 2 or Layer 3 network.
	Use a standard Category 5 cable with straight-through signaling and standard RJ-45
	connectors to connect the access point to the switch on the network.
LEDs	The LEDs indicate power and activity. See “Checking the LED Indicators” on page 7
	for details.
Antenna Connectors	Two SMA-female antenna connectors allow you to connect antennas that operate in
	2.4 GHz and 5.3 GHz bands.
Reset Button	The reset button is accessible from the back of the access point as well as through the
	mounting bracket. Push the reset button to restore the access point to its factory
	default settings.
Mounting Bracket	The mounting bracket comes attached to the access point. This mounting bracket
	allows the access point to be mounted to a wall or ceiling.

3Com quick start 3Com AP2750 Managed Access Point Features, Feature Description