6 Checking the LED Indicators
When the access point is connected to power, LEDs indicate activity as follows (solid LED indicates connection; blinking LED indicates activity):
POWER | 11a | 11b/g | 100 | 10 |
|
|
|
| LED | Color | Indicates |
|
|
|
|
| Power | Green | The access point is powered up |
|
|
| and operating normally. |
|
| Off | The access point is not receiving |
|
|
| power or there is a fault with the |
|
|
| power supply. |
|
|
|
|
| 11a | Green | The access point has WLAN |
|
|
| frame transmission over the |
|
|
| 802.11a 5.3 GHz radio band. |
|
| Off | No link is present. |
|
|
|
|
| 11b/g | Green | The access point has WLAN |
|
|
| frame transmission over the |
|
|
| 802.11g 2.4 GHz radio band. |
|
| Off | No link is present. |
|
|
|
|
100 | Green | The access point has a 100 Mbps | |
|
|
| Fast Ethernet connection. |
|
| Off | No link is present. |
|
|
|
|
10 | Green | The access point has a 10 Mbps | |
|
|
| Ethernet connection. |
|
| Off | No link is present. |
Troubleshooting
Refer to the Mobility System Configuration Guide or to the 3Com Wireless LAN Switch Reference Manual to obtain the access point status.
7
