Panasonic DVD-LS92 owner manual Troubleshooting guide, Reference

Models: DVD-LS92

1 20
Download 20 pages 22.29 Kb
Page 15
Image 15

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, refer to “Customer Services Directory” on page 17. (Reference pages are shown in parentheses.)

The following do not indicate malfunction.

Sound from the AC adaptor during recharging.

The battery pack warming up when recharging or during use.

The surface and area around the unit becoming warm when used for long periods.

Reference

Power

No power.

Unit turns off automatically.

Cannot charge or the [CHG] indicator fails to light.

Play time dramatically reduced after recharging.

Check connections to the AC adaptor or battery pack. (5)

The unit has protection circuitry that is activated if it becomes too hot or too cold. The unit will not work if this occurs. Use the unit between 5°C (41°F) and 35°C (95°F).

The unit turns off after it has been stopped for about 15 minutes (about 5 minutes when the unit is powered by the battery pack) to conserve power. Turn the unit on again.

The charging time increases when the temperature is too hot or too cold, and charging may not be possible under some circumstances.

Check connections to the AC adaptor or battery pack. (5)

The battery pack has reached the end of its service life (It can be recharged about 300 times).

No operation

No response when any buttons pressed (U99).

You have forgotten your ratings password.

No picture or sound.

This unit cannot play discs other than the ones listed in these operating instructions. (6)

The unit may not be operating properly due to lightning, static electricity or some other external factor. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect the power source (AC or battery pack), and then reconnect it.

Condensation has formed: Wait 1 to 2 hours for it to evaporate.

Please insert the disc correctly. (7)

Press [u], [h] and [q ON] at the same time in the status of “No Disc”. The unit restarts after “Initialized” displaying on the screen. All settings will return to the default values.

Check that the disc has something recorded on it.

Specific operation impossible or incorrect

It takes time before play starts.

No subtitles. Play doesn’t start.

Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the correct play time will not be displayed; however, this is normal.

Display the subtitles. (11)

If a disc contains CD-DA and other formats, proper playback may not be possible.

Picture incorrect

Picture distorted.

No picture on the LCD.

The LCD is dark.

LCD pixels turn black or radiate different colors.

Picture doesn’t appear on the television (or the size of the picture seems wrong).

There may be some video distortion during search, but this is normal.

Check connections. (5)

Select a LCD-SIZE other than “Monitor Off” (No picture). (9, Selecting how to show 4:3 aspect pictures on the LCD)

When you connect Audio/Video cable to this unit, the LCD will be off, and video signal is output from VIDEO OUT Jack.

Adjust the brightness. (9)

The LCD is constructed with precision technology so 99.99 % of the pixels are active, but of the remaining of 0.01 %, there are pixels that may be black or emit light constantly. This phenomenon is not a malfunction.

Check connections. (13)

Check that the television is on.

Check that the input mode on the television is correct.

Check the settings of “TV Aspect” in “Video” tab. (12)

Ensure that the unit is connected directly to the television, and is not connected through a video cassette recorder. (13)

Use the television to change the aspect.

RQTC0175

15

Page 15
Image 15
Panasonic DVD-LS92 owner manual Troubleshooting guide, Reference