3Com manual What You Need to Install Your Cable Modem CMX, 3Com U.S. Robotics Cable Modem CMX

3Com U.S. Robotics® Cable Modem CMX

Quick Installation Guide

What You Need to Install Your Cable Modem CMX

Included:

∙Cable modem

∙Cable modem power supply

∙RJ-45 network cable

∙Rubber feet and stacking clips kit

∙Cable Connections™ CD-ROM

∙This Quick Installation Guide

∙User’s Guide & Reference

PN 1.024.1970-00

Copyright © 3Com Corporation. All rights reserved. 3Com and U.S. Robotics are registered trademarks and Connections is a trademark of 3Com Corporation. Windows is a registered trademark of Microsoft Corp. Macintosh is a registered trademark of Apple Computer, Inc. Any other trademarks, trade names, or service marks used in this manual are the property of their respective owners.

Not Included:

∙A PC running Windows® 95 (or later) or a Macintosh® running System 7.5 (or later) with TCP/IP protocol installed (see the “Before You Begin” section in the included User’s Guide & Reference for more information about installing TCP/IP)

∙An active two-way cable line

∙An active Ethernet port or network interface card (NIC) installed in your computer

∙A 7/16 inch (or adjustable) wrench for securing the cable line to the modem

∙A screwdriver, pushpins, and screws (for optional wall- mounting). The screw heads should be at least 0.2” (5mm) in diameter for them to be properly captured in the slot. If you are using wood screws, use #6 pan heads or equivalent.